Walk through any RO membrane catalogue and the choice looks bewildering: brackish, seawater, low-energy, high-rejection, fouling-resistant, low-pressure, extra-..
4 min readEvery RO membrane datasheet carries the same line: feed SDI less than 5, preferably less than 3. Most plants measure it at commissioning, write the number in th..
4 min readCleaning an RO membrane is the one maintenance job where doing it badly is worse than not doing it at all. A clean at the wrong pH, the wrong temperature, or th..
4 min read
RO Membrane Fouling vs Scaling: How to Tell Which One You Have · 4 min read 
UF Membrane Fouling and Cleaning: Backwash, CEB and CIP Explained · 5 min read 
Submerged MBR vs Pressurised UF: Choosing the Barrier After PSF and ACF · 4 min read 
MBR Membranes: Hollow-Fibre vs Flat-Sheet · 3 min read 
Getting RO Recovery Right: Recovery Rate, Reject and Antiscalant · 4 min read 
UF as RO Pre-Treatment: The Membrane Before the Membrane · 4 min read 
Twin-Lobe vs Tri-Lobe Blower: Complete Technical Comparison Guide Technologies · · 17 min read Loading...
